There may be significantly to accomplish to substitute the display on the Compaq V5000 laptop computer, nevertheless, it isn't really hard. The process entails disconnecting a couple of cables and twisting a lot of screws. The laptop computer is going to be half-way disassembled through the time you receive towards the display, however the work won't consider really lengthy simply because the elements are so simple to get rid of. You are able to have the display replaced in 45 minutes or so and also have your personal computer up and operating once again.
Points You will Require:
Replacement show
Phillips-head screwdriver
Flat-head screwdriver
Action 1Shut down the personal computer and disconnect the energy cord.
Action 2Remove all of the exterior elements which are linked towards the personal computer, close the show and turn the personal computer more than.
Action 3Remove the battery in the personal computer.
Action 4Locate the memory module/Mini PCI card compartment within the middle from the personal computer bottom. Extract the screw that secures it towards the bottom and get rid of the include.
Action 5Locate the Mini PCI card within the contrary part from the compartment in the memory module, which can be covered through the metal memory shield, and disconnect both antenna cables on it.
Action 6Extract both screws in the top-left and top-right corners from the bottom beneath the show hinges.
Action 7Extract both change include screws within the battery bay.
Action 8Turn more than the personal computer and open the show as far as it'll go.
Action 9Lift the tabs above the "F1," "F5," "F11" and "Insert" keys to release the change include and consider it away the personal computer.
Action 10Extract the 4 screws in the best from the computer keyboard and flip the computer keyboard more than the palm rest.
Action 11Disconnect the flat cable below the computer keyboard. Consider the computer keyboard away the personal computer.
Action 12Locate the show cable in the top-right part from the personal computer within the room vacated through the change include and disconnect it.
Action 13Locate the antenna cables about the contrary part from the change include room and consider them out of their information to ensure that they move freely.
Action 14Extract both screws on every show hinge (4 screws in all) and lift the show away the personal computer.
If you are replacing the whole show assembly, carry out Action 14 to Action 1 in reverse to assemble the personal computer using the new show. If you would like to disassemble the show to obtain towards the display, carry on to Action 15.
Action 15Remove the six rubber buffers close to the show encounter and extract the screws beneath them.
Action 16Separate the show encounter in the back again include.
Action 17Disconnect both cables about the base from the display.
Action 18Extract every screw about the show hinge bottom handles (two screws) and get rid of the bottom handles in the show.
Action 19Extract the 4 screws operating throughout the base from the display and get rid of the display in the show.
Action 20Perform the process in reverse purchase to assemble the personal computer.
No comments:
Post a Comment